Publicité
Les langues disponibles
Les langues disponibles
Control 4×1 HDMI KVM Switch in the same way as shown above.
EN
ZH
Switch input devices by pressing the button [Select] on the front panel of HDMI KVM
à
Switch.
Press the button [Select] again to switch to input device 2.
à
022
044
Tips: The LEDs ,
,
,
1
2
3
panel will be lit, if you switch to
input device 1. It indicates that the
USB ports of input devices 1, 2, 3, 4
have been successfully connected.
The HDMI signal of input device 1 is
now output by the display.
Tips: The LEDs ,
,
,
1 2
3
panel will be lit, if you switch to
input device 2. It indicates that the
USB ports of input devices 1, 2, 3, 4
have been successfully connected.
The HDMI signal of input device 2 is
now output by the display.
,
on the front
4
1
,
on the front
4
2
Publicité
