Publicité
Les langues disponibles
Les langues disponibles
„ Replacing the paper roll – complete replacement procedure
The following procedure demonstrates how to replace the paper roll by removing the printer
mechanism cover (Requires a Phillips screwdriver).
z Perform the following procedure with the equipment POWERED OFF
z To eliminate electrical hazards, disconnect the equipment from the main supply,
remove the AC Adapter and disconnect the test leads
z Never operate this equipment without the printer mechanism cover properly placed
and fastened with the provided screw
To unlock the printer lid, press the
area marked with "PUSH".
Remove the printer mechanism
cover.
Open the lid, remove the empty
roll and gently pull the leftover
paper. Remove the screw using a
Phillips screwdriver.
Remove the printer cylinder.
28
Pull the printer mechanism cover
as indicated. Be careful to not
damage the snap-fit locks located
underneath the cover.
Place the new paper roll with the
paper tip facing down.
Publicité
