Publicité
THE BABY COT SET INCLUDES: Folding cot; Mattress; Carrying bag.
ASSEMBLY AND OPERATION: ATTENTION! Follow exactly the instructions and sequence for
assembling the product as described in the text and illustrations. Never put fingers inside the
corners or any other moving parts of the cot while folding and unfolding the cot.
1. UNFOLDING THE COT – FIGURES A: Remove the cot from the bag. Loosen the self-adhesive
tapes that hold the mattress. Remove the cot and set the mattress aside. Place the cot upright
and separate the legs by pulling both sides of the cot in opposite directions. Unfold all four
corners of the crib so that you can catch the locking mechanisms in the middle of each side. Lift
the sides of the crib until they lock. Push the centre of the crib down until it is fully unfolded and
locked (you will hear a clicking sound). Place the mattress in the cot with the soft side up. Attach
the mattress to the base.
2. FOLDING THE COT – FIGURES B: Remove the mattress. Pull the strap of the locking
mechanism on the bottom of the cot as MAXIMUM as possible to release the lock. ATTENTION!
Failure to pull the mechanism to its highest position may damage the locking of the sides.
Warranty conditions do not include damage caused by improper use of the product. Find the
buttons in the middle of each side. Press them and fold all sides of the crib. Take the mattress
and wrap it around it. Close the package by wrapping the velcro straps around the mattress. Put
the cot in the carrying case and fasten the zipper.
3. INSTALLING THE SECOND FLOOR LEVEL – FIGURES C: - Install the second level with its zipper
and the one on the sides of the cot. Place the tops of the 4 metal tubes in the pockets at the top
of the second level and connect the tubes. Place the mattress on the second level and secure it
with the straps under it.
4. ATTACHING THE COT TO THE ADULT'S BED - FIGURES D: Тakedown the sideway panel of the
bed and lock it in the crib's basis, using the locking button. Use the two seat belts provided in
the kit to secure the baby cot to the parent's bed. Lock the buckles under the cot on both sides,
then secure the belts around the structure of the parent's bed, starting at the bottom and going
up, and finally tightening the buckles under the bed. To secure the baby cot when it is next to
the parent's bed, pull the straps once more to make sure the crib is securely attached to the
parent's bed.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Clean the plastic or metal parts of the product with a soft cotton cloth or sponge moistened with
water. For cleaning the changing pad follow the instructions on the label. Do not use bleach,
aggressive detergents, or abrasive products to clean the product. All textile parts and fabrics
should be washed only by hand, following the instructions on the label (to be cleaned with a
damp cloth and a mild detergent). After cleaning, allow the cot to dry well before using it. Do
not fold or remove the cot before it is completely dry. Do not expose the product to direct
sunlight for extended periods of time and to extreme temperatures that may change colour and
damage exposed parts. Do not place objects in or on the product to avoid damaging the
structure and / or upholstery. Store the product in a clean and dry place.
Manufactured for Moni in PRC,
Manufacturer and Importer: Moni Trade Ltd.,
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90, Website:
www.moni.bg
21
Publicité
