MAX TOOLS LITIO12V Mode D'emploi page 18

English
Charging of cell phones and tablets
1. Plug the switch cable to Quick Charge output port.
2. Select appropriate connector and connect it to your mobile phones or tablet.
3. Touch the switch button, it can recognise electronic products suitable
parameters, start to charge for mobile phone/tablets etc.
Use of the LED lamp
Press the switch 3 seconds to start the LED flash light.
There are 4 modes of LED light appear in order (normal, strobe. SOS, off) if you
press slightly.
TECHNICAL SPECIFICATIONS
Lithium Battery Capacity (LiPo)*
Outputs
Input socket
Recharge time
Cranking Ampere
Peak Ampere
Operating temperatures
Sizes
Weight
(*) Lithium polymer Battery
18
12000 mAh (44.7 Wh)
Quick Charge (5V 3A;9 V 2A ;12V 1.5A);
PD30W (5V 3A, 9V 3A, 12V 2. 5A,15V
2A,20V 1.5A); 12V jump start
PD30W (5V 3A, 9V 3A, 12V 2. 5A,15V 2A,
20V 1.5A)
About 2 hours
500A
1500 A
-20°C / 60°C
186x98x37 mm
590 gr