Operation Tips; Technical Specifications - Perel Tools DGG25 Notice D'emploi

4. Features
•
with automatic glue supply
•
includes: glue gun, base station, power cord, glue sticks (3x)
5.

Operation tips

•
Slide a suitable glue stick into the back of the glue gun.
•
Feed a new glue stick before the previous one is finished to ensure
continuous glue flow.
Corded use [1]
• Connect the power cord to the glue gun and plug the other side in the
mains.
• Wait about 3 minutes for the glue gun to reach working temperature
(±175°). Trying to use the gun quicker might cause damage.
• Pull the trigger to dispense glue from the nozzle. The glue will harden in
about 30 seconds.
• Disconnect the glue gun from the mains when not used for a longer time.
Cordless use [2]
• Connect the power cord to the base station and plug the other side in the
mains.
• Plug the glue gun into the base station – fold connector down if necessary
– and let it sit for about 3 minutes to reach working temperature.
• Unplug the glue gun from the base station and use it cordless for about 4
minutes [3], or leave it in the base for precision work.
• Plug the gun back into the base station for at least 3 minutes to bring it
back to working temperature.
• Disconnect the base station from the mains when not used for a longer
time.
6.

Technical specifications

power supply
power cord length
temperature
dimensions
glue sticks
glue gun (LxBxH)
base station (LxBxH)
weight
glue gun
total
24/02/2009
DGG25
25W / 230Vac
1.4m
170~180°C
Ø11.2 (±4%) x 100mm
185 x 30 x 180mm
250 x 62 x 45mm
185g
380g
4
©2008 Velleman Components nv
®