FUXTEC CTL950 Manuel D'instructions page 29

Original-Bedienungsanleitung FUXTEC CTL-950_de_en_fr_ ita_rev1
_________________________________________________________________________________
3.4 Adjusting the push handle and pull bar
Step 3:
Pull on the fabric tab shown to pull
the wagon together. Then press the
wagon together by hand.
Step 4:
Close the safety clip. To reduce the
size of the wagon, you can also
easily pull the safety strap.
Step 1:
Press both buttons on the push bar
at the same time to adjust the angle.
The handle can lock in different
positions.
Step 2:
To use the telescopic pull bar,
simply pull it out of the frame holder
by the handle.
29