VWR 620-2711 Mode D'emploi page 8

NCT 1x0 / BCT 2x0 English
Handling
Alarm Function
The thermometer has an optical and
acoustical alarm.
This function can be activated or even
deactivated by pushing the alarm
button.
Additionally to the standard alarm
function, the acoustic alarm can be
confirmed by pushing the Alarm
Confirmation button while an acoustic
alarm is active.
The optical alarm stays until the
measured value is back between the
limits.
Switch Alarm function on / off
Push the Alarm button for 1 second to
turn the alarm function on or off.
Set Limits
Push the alarm button for 3 seconds to
start limit settings. Follow the
procedure.
.
8