VWR 620-2711 Mode D'emploi page 10

NCT 1x0 / BCT 2x0 English
What to do, if...
No Display
Check if the battery was inserted
correctly.
Please replace the battery.
Display shows „Lo."
The measured value is outside of the
measurement range.
Display shows „Hi."
The measured value is outside of the
measurement range.
Display shows "err"
Probe or cable is broken.
No Alarm Signal
Alarm function wasn't activated.
Repair and Service
If you have any complaints about the
BCT 2x0 or NCT 1x0, please contact
our customer service.
You will find additional information at:
www.vwr.com
10