Publicité
Les langues disponibles
Les langues disponibles
FEATURES
A) Slide Out Glass Shelves
(Number and type of shelves depends on the model.) Shelf
can be arranged on any of the rails inside the appliance. It is
protected against being pulled out accidentally. If you want to
remove a shelf, slightly lift up the front part and pull it out.
Perishable foods should be stored towards the back/rear of
the shelves.
B) Wine / Bottle Rack
Wine/bottle rack is intended for storage of bottles.
The wine/bottle rack can only be installed directly
above the crisper cover as depicted Fig. A.
C) Defrost Water Outlet
The interior of the refrigerator is cooled with a cooling plate
mounted in the rear wall. Under the plate there is a channel
and an outlet for defrost water. Regularly check the defrost
water outlet and the drain channel for blockage. They should
always be kept free and clear of food particles. If the drain
outlet does become clogged, use plastic straw to clear it.
D) Fruit and Vegetable crisper
The crisper drawer is on the bottom of the appliance under
the glass shelf. It provides adequate humidity which is
beneficial to fruits and vegetables (less dehydration.)
CHANGING THE DIRECTION ON
THE DOOR SWING
INSTALLATION INSTRUCTIONS
E) Door Liner
The door liner consists of various shelves or holders used
for storing eggs, cheese, butter and yogurt as well as other
smaller packages, tubes, cans etc. The lower shelf is used
for storing large bottles.
Illumination in the Interior of the Refrigerator
The light for illuminating the interior of the refrigerator turns
on when the door is opened, and off when the door is
closed.
If you find the direction of opening the door on your appliance
inconvenient, you can change it. Holes on the opposite side
have already been prepared in the factory. See figure below
for a guide to the components that must be removed and
switched to the other side.
4
Publicité
