Publicité
Les langues disponibles
Les langues disponibles
9
Temperature and time settings may be changed dutiny the cycle, by pressing TIME or °C.,
depending on the values to be changed. Changes are made usány the arrows on the control
panel.
. To confi rm, press START
. If the settings are not confi rmed, the unit will revers to the most recently confi rmed values.
. The „Maintain temp" program is activated by holding down PRH. The control light will
fl ash red and green. This programkeeps the initially-selected temperature until the STOP
buton is pressed. The green control light will come on after the desired temperatur eis
reached. If the temperature descreases, the control light will fl ash green.
. The Heating" program is activated by pressing the PRH buton. The red control light will
come on. When the desired temperatur is reached (option L4) a thricerepeating audio signal
will indicated such.
Menu
L.1 Temperature program 1
t.1 Time program
r.p. Repeating signal for end of program 1-4
L.2 Temperature program 2
t.2 Time program 2
L.3 Temperature program 3
t.3 Time program 3
L.4 Temperature program 4
t.4 Time program 4
L.t. Heating temperature
r.t. Repeating end of heating signal
n.PA. Setting – password
. To enter the menu press STOP and START
. The unit wil ask for the password, which has been set by the producer to"0". The password
may be changed via the menu
. If set at „0" , L.1" – temperature program 1 will automatically be displayed.
. If changes have been made to the settings, those changes must be confi rmed by pressing
START.
. By pressing START the menu cycles throught further settings.
. After pressing PIZZA _ t.1. – time program 1 is displayed.
. The up-arrow buton PIZZA incresaes set values, and the down- arrow buton STOP.
. Confi rm changes values by pressing START or PRH.
. Exit menu by pressing PRH . To advance to the end of the menu, pes PIZZA.
ORDINARY
Publicité
