IBEA TS2460 Manuel D'instruction page 22

GB
ENGLISH
9. WARRANTY CERTIFICATE
This machine has been designed and produced with the most advanced technology. The manufacturer
guarantees its products for twenty-four (24) months from the date of purchase, with the exception of product
for continuous professional service, used for third parties witch are guaranteed for twelve (12) months from the
date of purchase.
LIMITED WARRANTY
1 ) Warranty starts on the date of purchase, the manufacturer will supply free of charge any part defective in
materials and workmanship. Warranty does not provide for the replacement of the machine.
2) Product failures will be scheduled and repaired according to the normal work flow; any possible delay
cannot lead to damages nor to an extension of the warranty period.
3) Claims under warranty will be accepted on submission to your Authorized Service Dealer of the completed
and duly stamped. Warranty Certificate together with the original purchase document stating the date of
purchase.
4) Warranty fails in case of:
- evident lack of maintenance;
- incorrect use of the machine or tampering;
- use of incorrect fuel and or lubricants;
- use of non-genuine parts;
- repairs made by unauthorized service people.
5) Parts subject to wear and tear such as cutting items, clutch or cutting safety devices filters, clutch etc.,
are not covered by guarantee.
6) Shipping / transportation charges and labour incurred in replacing defective parts on warranty, shall be
born by the purchaser.
7) Claims for damages incurred during transportation have to be immediately reported to the carrier: failure to
do so will invalidate the warranty.
8) Should any failure occur during or after the warranty period, customer has not the right to interrupt payment
nor to a price discount.
9)The manufactorer is not responsible for any direct or indirect damage caused to persons or things by
failures of the machine or by a forced suspension in its use.
DEALER :
S.N. n.°
BOUGHT BY Mr. :
:
DATA
...........................
22