Publicité
Les langues disponibles
Les langues disponibles
Power supply
Number of power supply inputs
PWR1/PWR2 power supply
PoE power supply
Power consumption
Ethernet interface
Number of ports
Type of ports
Connectors
Cables
Digital inputs
Number of DI
Type
Tension max
Isolation
Connector
Digital outputs (Alarm contact)
Number of DO
Type
Max voltage
Max load current
ON-Resistance
Isolation
Connector
GNSS interface
Satellites
Antenna socket
Antenna type
Wi-Fi interface
Number of interfaces
WiFi
Radio mode
Modulation rates
3: PWR1, PWR2 and from V2 version:
PoE 802.3af
9 to 48VDC, protected against wire
inversion
5-ways terminal block connector
The PoE power must be 802.3 af / at
type 1 class 3 compliant and connected
to LAN2
Average consumption between 2.6 and
9.6W.
Recommended power supply: 12W
2 (LAN1, LAN2), LAN2 is a PoE port
(From V2 version).
Auto MDI/MDI-X
10 BASE T/100 BASE Tx/1000 BASE T
with automatic 802.3u negotiation
RJ45
Straight cable T568B, Ethernet CAT5e
UTP, with 2 RJ45 connectors
2 (IN1, IN2)
Opto-isolated
24VDC, protected against over-voltage
1500V
8-ways terminal block
2 (OUT1, OUT2)
Solid state relay 1 form A (normally open)
60VDC, not polarized, protected against
transient over-voltage
80mA
25 ohms typ., 35 ohms max
1500V
8-ways terminal block
GPS, Galileo, GLONASS, Beidou
1 SMA female
Active antenna only (not supplied)
1 (WiFi)
802.11n 2T/2R (modes a & g, 300 Mbps
max.)
Supports for IEEE 802.11a/h, 802.11b,
802.11g, 802.11n
802.11n 2T/2R: up to 300 Mbps
802.11a/h: 6 to 54 Mbps
802.11b: 1 to 11 Mbps
802.11g: 1 to 54 Mbps
-15-
Publicité
