LENCO BMC-060WH Mode D'emploi page 10

4. To Pause the Track: Short press the
5. To Play the Track: Short press the
Headphone mode/Line-out mode
When the speaker is playing music, insert a 3.5mm jack headphone to the
headphone socket, you will hear the sound from the connected headphone.
You can also connect the microphone with an external active speaker or Hi-fi
system with Line in function. Then you can hear the sound of the microphone
on the external speaker or Hi-fi system.
Noted: The 3.5mm aux cable is not included.
Troubleshooting
The power light is
not ON
The microphone
has no sound.
The microphone
has no echo.
The sound has
noise.
⚫ Name: Portable Wireless Microphone Bluetooth Speaker with LED
⚫ Item NO.: BMC-060
⚫ Input: DC5V; 500mA
⚫ Output Power: 5W*1 + 1 x passive radiator
⚫ Bluetooth version: V5.0
Please check the USB-C cable and charge it.
Please power on and adjust the volume to big.
Please slide the echo to big, please do not put the
speaker on the table under echo opening
condition.
Please confirm whether there is
environmental interference.
10
button.
button again.