Publicité
Les langues disponibles
Les langues disponibles
PROBLEM
"Add Water"
indicator is on.
"Ice" indicator
is on.
Ice cubes stick
together.
Ice making cycle is
normal but no ice
formed.
10
TROUBLESHOOTING
POSSIBLE CAUSE
Lack of Water.
Ice is full in basket.
The ice making cycle
is too long.
Water temperature in
inner tank is too low.
Room temperature or
water temperature in
inner tank is too high.
Refrigerant in cooling
system leaks.
Pipe in the cooling
system is blocked.
SOLUTION
Stop the ice maker, fill water,
and press "Power" button
again to restart the unit.
Remove ice from ice basket.
Continuous press "Select"
button 5 seconds, the unit
could make ice 10 cycles
even "Ice" indicator is on.
Stop the ice maker, and
restart it when the ice blocks
melt. Select the small size
ice cube selection.
Replace the water.
Temperature of water
recommended at 45℉-90℉
The room temperature
should be 50℉-105℉, water
temperature should be
45℉-90℉
Verify by a qualified
technician.
Verify by a qualified
technician.
Publicité
