Eiko LED T8 Linear tube Instructions D'installation page 2

Luminaire Dimension
(LxWxH)
48.4" x 22.8" x 3.2"
24" x 22.4" x 3"
36.2" x 22.4" x 3"
23.6" x 22.4" x 3"
Maintenance
• Disconnect lamp from power supply before any maintenance.
• Clean lamp with a dry cloth only.
• Do not clean the lamp with corrosive chemicals.
Installation
1. Inspect lamp before installation. If any damage do not install.
2. Turn off power at breaker before installation. Fig. 1
3. Remove lens of diffuser (if applicable).
4. Remove exisiting lamps from the luminaire. Fig 2.
5. Dispose of exisiting lamps in accordance with government regulations in your area.
6. Install LED lamp to luminaire ensure both pins are in the lamp holder.
7. Rotate the LED lamp until the lamp locks into place. Ensure that the LED lamp front points away from the back of
the luminaire. Fig 3.
8. Place lens or diffuser back in place (if applicable).
9. Turn power back on. Fig 4.
2
Max Number
of Tubes
4 x 48"
4 x 24"
4 x 36"
2 x U-Bend
EiKO Global: 1.800.852.2217 EiKO Canada: 1.705.721.5189
eiko.com
Rev. November 16, 2022 2:47 PM