Publicité
Les langues disponibles
Les langues disponibles
3. OPERATING YOUR UNIT
1.KEY
A. SET key; temperature setting button of unit
2.DISPLAY SCREEN/FUNCTIONS
1.
COLDEST
2.
COLDER
3.
COLD
4.
FREEZER/FRIDGE SWITCH BUTTON
3.DISPLAY
Once initially powered on,the display screen will be on full display for 3s. and then will run runs according to
COLDER /FRZ mode.
In freezer mode the temperature range is 10º to - 8 ºF (-12º to -22º C)
In refrigerator mode the temperature range is 35º to 45 ºF (2º-7º C)
Under normal circumstances the display will shows the actual temperature setting of the unit. ln case of
a failure, the corresponding LED will be displayed:
Fault Codes
Indicator 3 and 4
Indicator 2 and 4
indicator 1 and 4
TEMPERATURE SETTING
4.
Each time the temperature setting button "A" is pressed once, the temperature setting changes one
time. Once the temperature setting is complete, the refrigerator will operate in the selected mode
after 15 seconds.
The shift regulation is as such :
To set the temperature:
1. Press and hold button "A for 3 sec. to unlock the panel
2. Press "A" repeatedly to adjust the setting to "COLD" , " COLDER" or "COLDEST" as
needed.
Fault Description
Refrigerator sensor circuit
Freezer defrost sensor
Ambient temperature sensor
9
①
②
③
④
A
Publicité
