Pelgrim GVWC330L/P02 Mode D'emploi page 151

WiFi connection
ConnectLife
You can remote control this dishwasher with your smartphone/tablet. Connect the dishwasher to your
wireless network to be able to remote control and start the dishwasher using the ConnectLife app.
The app can be used to find information, change settings, start a program and monitor the dishwasher.
(The dishwasher can always be used without the app.)
On/Off
Preparations
Your smartphone/tablet must be connected to the internet.
The router in your wireless network must be connected to the internet and the dishwasher must
be in range of your wireless network.
Use your smartphone/tablet to download the ConnectLife app from the appropriate app store or
scan the QR code below.
You will find the dishwasher's QR code (and the AUID code) on the serial number plate.
AUID code (37 digits)
Connect to a network and pair
Connect the dishwasher to your wireless network and pair with your smartphone/tablet.
Open the ConnectLife app and register an account.
Go to Appliances. Click on Add appliances or the + button. Select Home appliances.
Scan the dishwasher's QR code (see the serial number plate). Follow the further instructions in
the app.
Open the dishwasher door and press
On the dishwasher's control panel: Press
On the dishwasher's control panel: Press and hold
on the display, after which the display starts counting down.
WiFi
Display
QR code
.
to activate the WiFi module.
for 3 seconds to start connecting. C appears
Start/Stop
19