Publicité
Les langues disponibles
Les langues disponibles
Assembly Instruction
1. Use a tape measure to determine the position on the wall and drill
holes. Drill holes (on the left and right) according to the size of the
screws, and then tap the plastic parts into the drilled holes (as
shown in the figure).
2. Twist the self-tapping screw into the fixed plastic part, leave the
screw about 10MM outside the wall, and ensure that the screw is
fixed well enough to bear the weight of the mirror.
3. Hang the mirror on the fixed screw, and align the hook behind the
mirror with the screw.
4. After installation, tear off the protective film on the mirror surface.
5. Insert the plug cord directly into the socket, and the connecting
wire can be hidden behind the mirror (if there is a reserved power
wire on the wall, you can cut off the plug of the light wire and
connect the light wire to the reserved wire).
03
Publicité
