Felisatti MKF1200/VE2 Mode D'emploi page 4

TECHNICAL DATA
Double rod mixer
Rated power
No load speed
Work shaft thread
Torque
Mix volume
Approx. weight
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at
hand to use when carrying out maintenance on the
indicated parts.
If the machine is used carefully and normal maintenance
is carried out, it will work well for a long time.
The functions and use of the tool you have bought shall
be only those described in this manual. Any other use
of the tool is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See figures)
A Safety push button switch (Fig.1)
B On-/off switch (Fig.1)
C Drill chuck shaft gap (Fig.1)
D Mechanical speed shift lever (Fig.1)
E Auxiliary grip (Fig.1)
F Speed adjustment (Fig.1)
G Quick Fix Adapter (Fig.1 and 3)
H Mixing rod (Fig.1 and 2)
EQUIPMENT
- Quick Fix Adapter
- 2 mixing rods
- Operating instructions
- Safety instructions
- Warranty
SAFETY INSTRUCTIONS
 See "Safety Instructions" manual, supplied with this
 Warning! Follow the insurance company's safety
instruction manual.
 For your personal safety, always connect the machine
instructions regarding the responsibility of employees.
to a mains supply protected by a differential and ther-
mal cut-out switch, in accordance with regulations on
 Do not perforate the machine casing, as this would
low-voltage wiring sitemaps.
 Always unplug the machine before doing any work on it.
destroy the protective insulation (use adhesive labels).
 Warning! Before each use, inspect the plug and
lead. Should they need replacing, have this done by
an official service centre. Only plug the machine in
 Always keep the lead out of the machine's working area.
when it is switched off.
 Only plug the machine in when it is switched off.
 Do not allow the machine to get wet, nor should it be
 Hold the machine firmly by the handle and the auxiliary
used in wet environments.
handle, otherwise the machine could work imprecisely
or even dangerously.
W
rpm
ISO
Nm
L
kg
MKF1200/VE2
1200
120-450/245-825
5/8"x16
57/27
120
4.6
 The machine must not be used at a location where a
 Solvents or products containing solvents must not be
danger of explosion exists.
mixed since there is a danger of igniting if the tempera-
 Officially approved extension cables must be used for
ture exceeds 21ºC.
 The machine should only be start and stopped inside a
outside operations.
container and this must be firmly fixed in place and
 Hands or other objects should not be inserted into the
unable to move.
 The machine should be inserted into or removed from
container when working with the machine in operation.
the container at a low speed, and once inside, speed
can be increased to maximum in order to prevent ma-
chine over-heating and it should be moved in all direc-
 Keep work area clean and well lit. Cluttered and
tions to guarantee thorough mixing.
 Do not operate power tools in explosive atmos-
dark areas invite accidents.
pheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
 Keep-children and bystanders away while oper-
may ignite the dust or fumes.
ating a power tool. Distractions can cause you to
 Avoid body contact with earthed or grounded
lose control.
surfaces such as pipes, radiators, ranges and re-
frigerators. There is an increased risk of electric
 Do not abuse the cord. Never use the cord for
shock if your body is earthed or grounded.
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
 When operating a power tool outdoors, use an
the risk of electric shock.
extension cord suitable for outdoor use. Use of
cord suitable for outdoor use reduces the risk of
 Stay alert, watch what you are doing and use
electric shock.
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
 Use safety equipment. Always wear eye protection.
result in serious personal injury.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appro-
 Do not overreach. Keep proper footing and bal-
priate conditions will reduce personal injuries.
ance at all times. This enables better control of the
power tool in unexpected situations.
MKF1600/VE2
1600
105-420/215-865
5/8"x16
62/30
170
4.6