Westfalia 84 37 72 Manuel D'instructions page 14

Adjusting the Cutting Depth
1. For adjusting the cutting depth,
loosen both clamping screws (5)
first and slide the scale bar (6) to
the desired direction.
2. Re-tighten the clamping screws
(5).
Cleaning and Storing
 Unplug the power cord from the wall socket before cleaning the unit and
allow cooling down.
 Clean the unit with is lightly moistened cloth. Clean the blade of the unit
when still warm (not hot). Remove residues with a cotton cloth, a spade or
a wire brush.
 Do not use aggressive chemicals or abrasives to clean the unit.
All manuals and user guides at all-guides.com
Operation
10