Publicité
Les langues disponibles
Les langues disponibles
Maintenance
Maintenance
Surface burners
Burner controls
Make sure all surface burner knobs are in the OFF position.
CAUTION
•
Do not clean the control knobs in a dishwasher.
•
Do not spray cleansers directly onto the control panel. Moisture entering the
electric circuits may cause electric shock or product damage.
38 English
DOP36P86GLS_DG68-01105D-00_EN+MES+CFR.indb 38
1.
Pull the knobs off the control valve
stems as shown.
2.
Clean the knobs in warm, soapy water.
Then, rinse and dry them thoroughly.
3.
Clean the stainless steel surfaces using
stainless steel cleaner.
4.
Push the knobs back onto the control
valve stems.
Cooktop surface
The porcelain-enameled cooktop surface needs to be kept clean. We recommend
that you remove food spills immediately after they take place.
1.
2.
3.
4.
CAUTION
•
Do not use a steel-wool pad or abrasive cleaner, which can scratch or damage
the enamel surface.
•
Do not remove the cooktop surface for cleaning. The gas lines leading to the
burner manifolds can be damaged, resulting in a fire or system failure.
•
Do not pour water into the cooktop well while cleaning the cooktop. The water
could leak down into the range gas and electrical systems creating a risk of
electrical shock or high levels of Carbon Monoxide, due to corrosion of the gas
valves or ports.
Keep oven vent ducts unobstructed. Clean vents frequently to avoid grease
•
buildup.
Turn off all surface burners.
Wait until all burner grates cool down,
and then remove them.
Clean the cooktop surface using a soft
cloth. If food spills run into the gaps
around a burner component, remove
the burner cap and head, and then wipe
up the spills.
When cleaning is finished, reinsert the
burner components, and then put the
burner grates back into position.
2020-07-06 오후 4:27:14
Publicité
