Oki FAX 4515 Guide D'installation Facile page 2

II
New Toner Cartridge
Open the cover by taking hold of both document guides
1
and tipping the cover backward.
Take the new toner cartridge from the package.
2
Remove the black protective foil and other packaging mate-
3
rial, but do not yet remove the protective strip from the car-
tridge.
Shake the new toner cartridge back and forth several times
4
in order to distribute the toner evenly, thereby improving
the print quality.
All manuals and user guides at all-guides.com
5
6
7
Only after removing the other packaging, completely
pull off the protection strip located on the left side of the
cartridge .
Once you have removed the protection strip, do not
shake the toner cartridge any more. Otherwise, it is pos-
sible that toner dust will be released into the air.
Place the toner cartridge into your laser fax machine. The
cartridge should snap securely into position.
Close the cover. Make sure that the cover snaps securely
into position on both sides.
The toner level memory for this starter cartridge was set
at the factory. The starter cartridge need not be updated
with a Plug'n'Print card. For each additional toner car-
tridge that you insert into your fax machine, you must
update the toner level memory with the Plug'n'Print
card provided.