IPC PW-E101 Manuel D'instructions page 15

English
The fault is signalled by indicator light E) flashing and related
message on the Display.
6) High Temperature Fault: the high pressure washer shuts
down.
The fault is signalled by indicator light E) flashing and related
message on the Display.
7) NTC Probe failure: the heating system stops.
The fault is signalled by indicator light E) flashing and related
message on the Display.
N.B. To reset the fault signals, turn main switch "A" to
pos."0" and then back to pos. "I".
For further assistance, contact the technical service centre.
- 11 -