Herschel Krystal Serie Instructions D'installation page 3

4. Use 4 x self-tapping screws to secure the recess mount to the back of the heater.
5. Make final wiring connections to the heater.
6. Reflective insulation may be placed in the ceiling cavity behind the heater to minimise heat rising to
upper floors.
7. Place the assembled heater & recess bracket into the ceiling.
8. Place a screwdriver in the gap between the heater and the bracket and use it to swivel the tabs so they
clamp onto the rear of the ceiling material locking the heater into place.
ENGLISH