HomeMatic IP HmIP-P-DRG-DALI Notice D'installation Et D'emploi page 39

6.2.1 Resetting an individual DALI device
To reset an individual DALI device, proceed as follows:
• The DALI-specific functions can be activated by a long press on
the Select button (see figure 11).
• The symbol flashes in the display
• Change to the Reset menu by briefly pressing the Channel but-
ton
• Long press the Channel button to start the channel selection.
The first channel number starts to flash.
• Choose the desired channel by briefly pressing the Channel but-
ton.
• Long press the Select button to implement the reset of the se-
lected channel.
Search on the DALI
bus for addressed
DALI devices that
are still unknown to
the gateway
DALI exchange
DALI reset
Found devices are addressed and
assigned to the next free chan-
nels (1..32).
Exactly one device on the bus is
missing or defective and a new
device is available on the bus,
then this device is integrated.
Reset of all DALI devices on the
bus.
Operation
39