Garland BEST 311 PG Manuel D'instructions page 36

English
6.2.2. GUARD SUPPORT ASSEMBLY
Guard support
The skirt of the protector must not be worn when
working with the cutting disk.
The transmission can be locked
by inserting a tool or screwdriver
through the transmission hole
and the notch on the plate (3).
6.2.3. CUTTING ACCESSORY DESCRIPTION
Protector
Protector
Protector flap
1. Steel disc.
2. 2 wire head.
3. Sheet with notch for coupling the head or disc.
4. Sheet.
5. Protective bell of the disc.
6. Protective hood of the disc.
7. Disc nut.
8. Saucer.
6.2.4. MOUNTING THE NYLON BUMP HEAD
6.2.4.1. CHANGE OF THE NYLON BUMP HEAD
36/148