Publicité
Les langues disponibles
Les langues disponibles
1. Overlook
SNMP I Pro
Integrated SNMP card in the UPS SNMP slot
1 - Ethernet port (10/100Base-T)
2 - Sensor port/data transmission port (EMD)
3 - Golden finger: connects to UPS slot
4 - Ethernet port status LEDs
5 - Jumper setting to restore default setting
SNMP I Pro
Ethernet port status LEDs: 4
Green LED
Yellow LED
Pin assignment for Jumper: 5
Pin #
Pin 1 & Pin 2
Pin 2 & Pin 3
NOTICE: After setting is restored to default, be sure to change the jumper
setting to connect Pin 1 and Pin 2 for normal operation.
INFOSEC UPS SYSTEM – 15, Rue du Moulin - 44880 Sautron – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 03 21 AA 59 204 22
SNMP I Pro / External SNMP I Pro RS232
Quick Install
On
Off
Flash
Off
Status
Description
Closed
Normal operation
After re-connecting utility, the IP address of SNMP I
Pro card and password will restore to default setting.
Closed
Default static IP address: (192.168.102.230)
Default password: 12345678
External SNMP I Pro RS232
External SNMP card to be connected to the
UPS RS232 port (DB9)
1 - Ethernet port(10/100Base-T)
2 - RS-232port
3 - 5Vdc DC input
4 - Data receiving indicator
5 - Data transmission indicator
6 - Power indicator
Port is operating at 100Mbit/s
Current web bandwidth is 10Mbit/s
Link Active
Card is not connected to the network
6
Publicité
