Inserting/Replacing the Batteries
1. The battery compartment of the LED lantern is located at the
bottom side of the lantern. Press the locking latch in the
direction of the arrow and remove the lid.
2. Insert two new batteries of the type LR20 (D) into the battery
compartment. Pay attention to the proper polarity of the
batteries. The polarity is indicated on the battery
compartment lid and inside the battery compartment.
3. Reinstall the bottom plate on the bottom side of the LED
lantern and snap it in place.
Replace all three batteries when the light of the LEDs shines
weakly or if it does not shine at all.
Operation
Turn the black knob on the base of the lantern clockwise to
turn on the lantern and regulate the light intensity. To turn off
the lantern turn the knob counter clockwise until the lantern is
turned off with an audible click.
Cleaning and Storing
▪ Clean the housing of the LED lantern only with a dry or lightly
moistened cloth. Do not use aggressive chemicals or abrasives
for cleaning.
▪ Do not immerse the LED lantern in liquids of any kind.
▪ Store the LED lantern indoors at a dry place that is protected
from dust, dirt and extreme temperatures.
▪ Store the LED lantern out of reach of children.
INSTRUCTION
9