Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Step 1
Take the main unit DA-2000 out of the box
Step 2
Get the standing unit, and then hook to the main unit.( as the Illustra-
tion in P2, it is suggested to use horizontal installation )
Step 3
Take the attached Coaxial Cable, and then connect the IEC Male
end(or F Male end) to the IEC Female End of your DVB-T Set Top Box
or Digital TV Set ;
Connect the F-male End to the F-Female End of the DA-2000.
Please note: all the connection should be fixed well.
Step 4
Take the AC-DC Adaptor, and then insert the Adaptor plug to the DC
input jack of DA-2000, and the AC end to the AC Outlet. Please use
only the supplied AC adaptor
** If your DVB-T receiver can supply with 5 VDC/40mA from IEC connector, then it is not nec-
essary to do Step 4.
Step 5.
Adjust the orientation of DA-2000 for best performance.
42
All manuals and user guides at all-guides.com
SPECIAL NOTE
Normally, you are suggested to
install the antenna nearby the
Digital Set Top Box or the TV
Set with Digital Tuner inside.
Publicité
