Télécharger Imprimer la page

Taurus Alpatec TROPICANO JET HOT&COOL Mode D'emploi page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
All manuals and user guides at all-guides.com
FAN FUNCTION:
- Press the function button (2) to select the
desired ventilation speed. The pilot light (5) will
indicate the current mode and speed selected.
HEATER FUNCTION:
- Press the function button (2) to select the desi-
red heat intensity. The pilot light (5) will indicate
the current mode and heat intensity.
- Press the temperature setting button (3) to
select the desired temperature (18, 21, 24, 27
or 30ºC). The temperature pilot lights (4) will
indicate the temperature you have selected.
- The thermostat will maintain the temperature at
the desired level.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance from the mains.
- Clean the appliance.
CARRY HANDLE/S:
- This appliance has a handle on the back to
make it easy and convenient to transport (F).
ANTI-TIPPING SAFETY DEVICE:
- The appliance has an anti-tipping safety device
that turns it off if the working position is not the
correct one.
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- When the appliance switches itself on and
off repeatedly, for reasons other than the
thermostat control, check to ensure that there
are no obstacles that impede correct air entry
or expulsion.
- If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
- Remark: When the appliance is used as a hea-
ter after long periods in storage or after having
been used solely as a fan a small amount of
smoke may be produced. This is not important
and is due to the heater burning dust de-
posits which have accumulated on the heating
element. This phenomenon may be avoided by
cleaning the inside of the appliance before-
hand through the grill with a vacuum cleaner or
pressurised air.

Publicité

loading