Publicité
Les langues disponibles
Les langues disponibles
- Press the switch on button (10). L' Appliance switches on in fan mode (
- Press the heating button (12) once to activate the low power heating mode. The icon " " and the letters
"P1" will appear on display.
- Press the heating button (12) twice to activate the hig power heating mode. The icon " " and the letters
"P2" will appear on display.
- Pressing the heating button (12), the fan mode will return.
In the heating mode:
o
The fan works at speed 2 and the speed cannot be changed.
o
The function light (7) lights up in red, to show that the heating mode is active.
o
If the product is switched off, it will keep working in fan mode for 30 seconds, for cooling down.
Switch on the product in any mode (Fan or heating).
Press the Oscillation button (14).
The base will start to oscillate horizontally and on display appears the icon
Switch on the product in any mode (Fan or heating).
The heater has a timer up to 24 hours, to activate it:
-
Press the button Timer (15).
Set the time from 1 to 24 hours with the buttons + and – (16 and 17).
-
On display appears the time set and the icon
Switch on appliance in heating mode (P1 o P2).
Set the desired temperature from 10 to 35°C, with buttons "+" and "-" (16-17).
In this case the appliance will keep heating until reaching the temperature set, and then will pass from fan
mode to heating mode to keep the temperature set.
Switch on appliance in heating mode (P1 o P2), and set the desired temperature.
Press the button ECO (13). The function light (7) lights up in green, to show that the ECO mode is active.
The product now works in energy saving mode and automatically sets the function mode, basing on the
difference between ambient temperature and set temperature.
If set temperature is 6 degrees over ambient temperature, works in high power heating (" " - "P2)
-
If set temperature is 3 degrees over ambient temperature, works in low power heating (" " - "P1)
-
-
If set temperature is equal or lower than ambient temperature, works in fan mode.
Dunring operation the appliance will automatically change the working mode depending on the difference
between ambient temperature and set temperature.
CLEANING
Unplug the power cord from the electrical outlet and allow the unit to cool down before cleaning.
Do not immerse in water. In any case prevent splashes of water or other liquids reaching the appliance.
Regularly clean the ventilation slot on the back of the unit and the air outlet grille (1) to prevent the dirt from
clogging the airflow. Do not clean the unit with a sponge or abrasive detergents.
TECHNICAL FEATURES
•
Power supply: AC 220-240V
•
Heating power: 1800-2000W. Fan power: 55W
•
Digital display, Remote control
•
Timer 24H, ECO Mode
•
Horizontal Oscillation
•
Safety device against overheating
HEATING MODE
OSCILLATION
TIMER 24H
. After the time, the heater will stop.
TEMPERATURE SETTING
ECO MODE
~
50Hz
) and with fan speed 1.
.
13
Publicité
