OPERATION
W a R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious injury.
W a R N I N G
Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with
hearing protection. Failure to do so could result in objects being thrown into your eyes and other
possible serious injuries.
W a R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious
personal injury. Before each use, inspect the entire product for damaged, missing, or loose parts,
such as screws, nuts, bolts, caps,etc. Tighten securely all fasteners and caps and do not operate
this product until all missing or damaged parts are replaced.
HOLDING THE TOOL
Operator is wearing proper clothing, such as boots, safety glasses or goggles, ear/hearing
protection, gloves, long pants and a long-sleeved shirt.
The blower is designed to be operated with one hand.
The user can carry it holding the control handle with the left or right hand.
Always walk slowly while working.
Always check the blowing nozzle outlet area.
Fig.9
16