Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLy
cONNEcTING THE POWER cORD TO THE BLOWER (See Figure 4.)
1. Insert the power cord (1) in the socket (2) on the back of the blower.
2. Push the plug into the socket and turn counter-clockwise until the plug's latch is engaged and
secure.
cONNEcTING THE BLOWER TO THE BackPack BaTTERy.
2
1. Insert the plug (1) in the socket (2) – line up the lugs on the plug with the slots in the socket.
2. Once the end of the plug is inserted in to the socket, turn the plug clockwise until the latch is
engaged and secure.
3. fit cable in the cable (3) duct and wind through the (4) housing – see also "Positioning the
Cable".
Fig.5
1
12
Fig.4
Fig.6
4
3
Publicité
