Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Check power supply before use. The voltage is 230-240V standard;
■
Do not plug the blender in until it is assembled;
■
Please use this item under PARENTAL SUPERVISION, Not Suitable for Children;
■
Family use only.
■
Do not operate any appliance with a damaged cord or plug or after the appliance
■
malfunctions, or has been damaged in any manner. Return appliance to the nearest
Repair Shop for examination, repair or adjustment.
Do not put Motor part into water or any other liquid.
■
Please make sure that you allow the machine to rest for a long time (about 30 minutes)
■
after 1 cycle.
The hand blender is not suitable for chopping very hard food items, such as nutmeg,
■
cereals, coffee beans or spices. Let peas and beans soak in a sufficient quantity of liquid
before processing them.
The blade in the blender shaft continues to turn for a few seconds after switching the
■
blender off. Wait for the blade to stop turning before removing the blender from food and
before further handling.
Do not use aggressive or abrasive cleaning products.
■
Make sure that the power cord cannot be damaged by sharp edges or hot surfaces.
■
Do not wind the power cord around the blender.
Do not make any modifications to the hand blander. Do not attempt to change the
■
power cord by yourself either. Repairs to the hand blender or power cord must only be
carried out by a specialist workshop or at the Service Centre. Improper repair may result
in considerable risk of injury to the user.
a- If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
b- Switch off the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
c- Care is needed when handling cutting blades, especially when removing the blade
from the bowl, emptying the bowl and during cleaning.
d- Always disconnect the blender from the supply if it is left unattended and before
assembling, disassembling or cleaning.
CLEANING AND MAINTENANCE
Please clean the Motor part with a soft, damp cloth.
■
Publicité
