Wiseup DV-07-WIFI Mode D'emploi page 3

All manuals and user guides at all-guides.com
onds,the blue and red indicator lights will start illuminating for 3 seconds again; the
red indicator light will be off again. Waiting for 8 seconds, the blue indicator light will
stay illuminated while the red one will start flashing, indicating the camera's WIFI
signal is ready.
4.2.2. Go to the WIFI or WLAN settings on your smartphone or tablet PCand con-
nect to the camera's WIFI signal. The camera's WIFI network SSID starts with
"KD******" and will appear on your WIFI or WLAN settings page as below.Both red
and blue indicator lights will keep flashing, indicating the camera's P2P connection
is done.
[Note]:
If the camera's WIFI signal cannot be found for a long time, press the Reset Button for 5 sec-
onds to reset all settings to factory default. The red and blue indicator lights will be turned off and the
camera will restart automatically in 5 seconds.
4.2.3. Launch the "BVCAM" APP.
4.2.4. Add the camera to the application.
For Android: Tap + > Search(Lan) >Tap the camera icon > Tap OK or √.