Appliance Description; Before Straightening; Recommended Temperatures - HAEGER Golden Sleek HS-45B.005A Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
Children should be supervised at all time to ensure that they do not play
with the device.

Appliance description

1. Flat plates to straighten
3. Temperature switches
5. Locking mechanism

Before straightening

The hair should be clean, dry and free of styling products. Excepted are the special
products that support a straightening of the hair.
Comb the hair thoroughly before straightening so that there are no knots in it.
To achieve an especially good straightening result, spread special products for hair
straightening through the hair.
Divide the hair into manageable portions and secure the upper portions to the head with
grips so that they do not get in the way.
Instructions for use
The device must be used only for dry hair.
Take a strand of hair and pull it carefully downwards until it is taut.
The remaining hair should be put up or fixed in place.
Before the halves are pressed together for approx. 5 seconds, we recommend that you
ensure that the hair is positioned correctly. Always begin at the base of the hair and move
the device in the direction of the hair tip.
To produce a uniform appearance, it is important that the next strands fall in one line.

Recommended temperatures

HAIR STRUCTURE
Fine, porous, coloured, bleached
Normal
Strong, resistant
Very curly and strong, and for a professional result
– The higher the temperature, the faster and more professional the results.
– When used at the maximum temperature, we do not recommend using the straightener
more than once on the same lock of hair.
Instructions for use
2. LCD Display
4. ON/OFF switch
6. 360° Swivel cord
TEMPERATURE
150ºC - 165ºC
170ºC - 185ºC
190ºC - 200ºC
205ºC - 220ºC
English
3

Publicité

Table des Matières
loading

Table des Matières