Omnitech 15331 Manuel D'instructions page 5

All manuals and user guides at all-guides.com
hold down the Code Search button for around 3 seconds until the LED light turns on and stays red.
Press the device button you want to display the code for (e.g. press the TV button to find out your TV's
code) and the LED light will blink once then stay red.
You now need to press each of the numbers from 0-9 in turn, while watching the LED light. When the
light blinks you have found the correct number. Doing this for the 3 digits will give you the correct
code.
For example, press 0, then 1, then 2, then 3, etc... The LED light will blink when you press the right
key. For example if the light blinks on 6, then that is the first number. You should now start again at 0,
then 1, then 2 etc... If the light blinks on 2 then the next digit is 2. Repeat this same procedure for the
third digit, so if it flashes on 8, the complete number is 628.
Note: once the 3rd digit has been successfully entered the LED will turn off.
Codes list
Cable box codes
VCR codes
TV Codes
DVD Codes
Satellite Codes
4