Canvas ANDERSON 068-7826-4 Instructions De Montage page 13

Step 7
Requires B, 1, 5, 22
Separate the EXTENSION SLIDES (2) from the EXTENSION RAILS (1) as shown in the
diagram. Be prepared; the parts are greasy.
Fasten two EXTENSION RAILS (1) to the LEFT END (B). Use six BLACK 1/2" PAN HEAD
SCREWS (22).
NOTE: For each EXTENSION RAIL, turn a SCREW into the holes shown in the diagram.
Then, slide the inner cartridge of the EXTENSION RAIL in to fi nd the other two holes that
line up with the holes in the LEFT END. Turn the SCREWS into those holes.
NOTE: The EXTENSION SLIDES will be used later for the DRAWERS.
Turn twelve ANGLED HEAD CAM SCREWS (5) into the LEFT END (B).
1
Use these holes.
Angled edge
All manuals and user guides at all-guides.com
Angled head
5
1
Push the black lever down and
pull the SLIDE from the RAIL.
5
B
Open end
Open end
22
2
Angled head
22
22
1
1
13