All manuals and user guides at all-guides.com
BEFORE USING
THE APPLIANCE
Remove all wrappings from the appliance .
OPERATING INSTRUCTIONS
1. Insert the appropriate detachable dryer at-
tachment (4,5 6 or 7) into the housing (1) until
a click is heard. Make sure the attachment is
firmly fixed.
2. Select the desired dryer work mode by set-
ting the work mode switch (2) into the appropri-
ate position (Low, High or Cool).
3. Start drying and styling your hair.
4. For convenient use of the dryer the power cord (8) can be
rotated 360°, which prevents it from getting twisted.
5. In order to remove the attachments from the housing (1), push
the button (3) and pull the attachment and the housing (1) in
opposite directions.
Use of attachments
Thickener (4) may be used to dry or style hair with a comb.
Separate a strand of hair and stretch it with a comb, while
drying the hair with the dryer with attached thickener (4).
Small diameter round styling brush (5) helps you to add
volume to the hair and curling at hair ends. Switch the appli-
ance on and one by one comb damp hair strands from their
roots to the very ends while slightly curling them.
Mid-size thermal brush (6) helps you to create loose waves
in medium length hair. Put a damp thin strand of hair on the
brush (6) and dry it using the High setting. Then switch on the
cold airflow mode (Cool) for several seconds to fix the style.
Carefully release the strand. Similarly curl the rest of the hair.
Also with the help of the thermal brush (6) you can easily
straighten the hair or curl the ends: styling is made quick and
easy because of the heat in heat in the metal working area of
the thermal brush (6) and is assisted by the hot air.
Large diameter curling-irons (7) are used to style long
hair. Push the lever (a) to slightly raise the hair clamp (b).
Insert hair strands between the working area (c) and the
clamp (b). Rotate the appliance housing (1) so that the strands
of hair are wound onto the working area of the curling –irons
(c ). Keep the strand on the curling –irons for 15-30 seconds,
then switch the Cool mode on for 5-10 seconds to fix the style
and give make the hair glossy. Carefully release the strand by
slightly raising the lever (a).
6