INSTALLATION
REQUIREMENTS
Electrical Requirements
Electrical Connection
To properly install your air purifier, plug
the 2 prong power cord into a grounded
120V outlet.
This appliance has a polarized plug (one
blade is wider than the other.) To reduce
the risk of electric shock, this plug is
intended to fit in a polarized outlet only
one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do
not attempt to defeat this safety feature.
Location Requirements
A
A. 6" (15.2 cm) minimum clearance
You will need a level surface at least 6"
(15.2 cm) from heat sources such as
ranges or heaters.
Do not block air openings or place air
cleaner on a soft surface such as a bed
or sofa.
Operate indoors only.
AIR PURIFIER USE
Starting/Stopping Your Air Purifier
NOTE: Before operating the air purifier,
record the date of installation on the HEPA
filter. Under normal conditions, the HEPA
filter should be replaced annually, and the
pre-filter should be replaced every
3 months. To remove and replace either
filter, see "Filter Replacement" in "Air Purifier
Care."
4
All manuals and user guides at all-guides.com
This manual covers several different models.
The air purifier you have purchased may
have some or all of the features listed.
1. Plug the 2 prong polarized plug into a
2. Press POWER to turn on the air purifier.
3. Press HIGH, MED or LOW button to
4. Press TIMER ON/OFF to set the timer.
5. Press POWER to turn off the air purifier.
Press HIGH, MED or LOW button to select
the desired fan speed.
Fan Speed
Low
Medium
High
1. Press TIMER ON/OFF to turn on the
A
I
Med
H
Timer
On/Off
G
POWER
F
A. Medium fan speed
button
B. High fan speed button
C. Timer plus "+" button
D. HEPA filter reset
button
E. Power button
Using the Control Panel
grounded outlet.
All segments of the Timer Display will
light, the fan speed will be set to Low
speed and the green LED indicator light
will turn on.
choose the desired fan speed. See "Fan
Speed."
See "Timer."
Fan Speed
Result
Best product sound
Slower cleaning power
Maximum cleaning power
Timer
timer. The timer automatically sets to
8 hours.
B
C
D
E
F. Timer On/Off button
G. Pre-filter reset
button
H. Timer minus "-"
button
I. Low fan speed
button