Pioneer DEH-P6200BT Mode D'emploi page 30

Appendix
Additional Information
Message Cause
NO AUDIO There are no
songs.
The connected
USB storage de-
vice has security
enabled
SKIPPED The connected
USB storage de-
vice contains
WMA files em-
bedded with
Windows Med-
iaä DRM 9/10
PROTECT
All the files in the
USB storage de-
vice are em-
bedded with
Windows Media
DRM 9/10
N/A USB The connected
USB storage de-
vice is not sup-
ported by this
unit.
Not compatible
USB device
CHECK USB
The USB connec-
tor or USB cable
has short-
circuited.
The connected
USB storage de-
vice consumes
more than 500
mA (maximum
allowable cur-
rent).
30
En
Action
Transfer the audio
files to the USB
storage device and
connect.
Follow the USB
storage device in-
structions to dis-
able the security.
Play an audio file
not embedded with
Windows Media
DRM 9/10.
Transfer audio files
not embedded with
Windows Media
DRM 9/10 to the
USB storage de-
vice and connect.
Connect a USB
Mass Storage
Class compliant
device.
Disconnect your
device and replace
it with a compati-
ble USB storage
device.
Check that the
USB connector or
USB cable is not
caught in some-
thing or damaged.
Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only com-
pliant USB storage
devices.
Message Cause
ERROR-19
Communication
failed.
ERROR-23 USB storage de-
vice is not for-
matted with
FAT16 or FAT32
iPod
Message Cause
NO DEVICE
When plug and
play is off, no
USB storage de-
vice or iPod is
connected.
Format read Sometimes there
is a delay be-
tween the start of
playback and
when you start to
hear any sound.
ERROR-19 Communication
failed.
iPod failure
Action
Perform one of the
following opera-
tions.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to the
USB source.
USB storage de-
vice should be for-
matted with FAT16
or FAT32.
Action
! Turn the plug
and play on.
! Connect a com-
patible iPod.
Wait until the mes-
sage disappears
and you hear
sound.
Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.