Publicité
Troubleshooting - English
No sound from stereo system
Possible problem: Power isn't turned on
• Make sure stereo system is on and power LED indicator is lit blue
• When using USB adapter as the power source, make sure cable is plugged into powered
USB device (e.g., laptop)
• When using batteries (not included) as the power source, make sure batteries are installed
correctly.
Possible Problem: Volume is set too low
• Increase the volume using the speaker system dial.
• Increase the volume from the audio source (e.g., iPod, iPhone, MP3 player) and set to the
medium level.
Possible Problem: Stereo system plug isn't connected to the audio source completely
• Fully connect the stereo plug to the audio source.
Possible problem: Problem with audio source
• Make sure the stereo plug is connected to the correct output.
• Use an alternate audio source to test the speakers.
Cracking sound from stereo system
Possible problem: Bad connection
• Make sure the stereo plug is connected to the correct output.
• Try another audio source such as a portable CD player or laptop
Sound is distorted
Possible problem: Volume level on the stereo system is too high
• Decrease the volume.
Possible problem: Volume level on the audio source is set too high
• Check the audio source volume and decrease if necessary.
Possible problem: Audio source is distorted
• MP3 les usually have poorer quality; noise and distortion are easily noticed with higher
volume and/or high-powered speakers. Try an alternate source such as portable CD
player.
9
Publicité
