Fora IR20 Manuel De L'utilisateur page 25

Step 3 Transmit Data
Follow the instructions provided in the software to transmit
data. Results transmitted will include date and time. Remove
the cable and the thermometer will automatically turn off.
Transmitting data via ZigBee Gateway
Module (FORA IR20z)
Step 1 Install ZigBee Gateway and switch on
the device.
(Please contact your agent to set up the device.)
Step 2 Transmit Data.
After finishing measurement, your results will be transmitted
automatically; the communication symbol on the thermometer
will flash and you will hear two beeps from the Gateway. It
means your result is successfully transmitted to the server.
The thermometer will turn off without pressing any button for 1
minute.
Transmitting data via Bluetooth Adapter
(FORA IR20b)
Step 1
Install Health Care System Software on your computer by
following the instructions provided on ForaCare's website.
Step 2
Install Bluetooth Adapter Software.
25