Prowork PAS 18 Mode D'emploi page 7

Anleitung PAS 18 SPK 1
On/Off switch (4)
Infinitely variable speed control is possible with the
On/Off switch. The further you press the switch, the
higher the speed of the battery-powered
drill/screwdriver.
Screwdriving
We recommend using self-centering screws (e.g.
Torx screws, recessed head screws) designed for
reliable working. Be sure to use a bit that matches
the screw in shape and size. Set the torque, as
described elsewhere in these operating instructions,
to suit the size of screw.
Technical data
Voltage supply
Speed 0-400/0-1200 rpm
Torque
Forward and reverse rotation
Chuck clamping width 0,8 - 10 mm
Battery charging voltage
Battery charging current
Mains voltage for charger 230 V ~ 50 Hz
Sound pressure level LPA: 68,1 dB(A)
Sound power level LWA: 81,1 dB(A)
–
Vibration
a
w
19.03.2004 9:57 Uhr
18 V =
16 levels
yes
18 V =
1,3 mA
< 2,5 m/s
2
Seite 7
GB
7