3. EMPTYING THE DIRT
COLLECTION TANK
When the dirty water in the tank has reached
its maximum level, the tank must be emptied
as follows:
3.4 Replace the tank stopper.
3.5 Resume cleaning operations.
WARNING: If the maximum filling level is ex-
ceeded, small quantities of water can leak
out of the ventilation slots. Always empty
the tank before the maximum filling level is
reached.
4. CARE OF YOUR APPLIANCE
Before performing any maintenance operation,
make sure that the appliance is off and/or
disconnected from the mains.
To clean the body of the appliance, simply use
All manuals and user guides at all-guides.com
3.1 Turn the appliance
off.
3.2
Pull
the
tank
stopper.
3.3 Tilt the tank and
drain the dirty water.
a moist cloth. Do not use solvents or
detergents which may harm the body material.
The cloths provided can be washed by
following the instructions included on the label.
5. CLEANING OF THE WINDOW
CLEANING FRAME
5.1 Release the window cleaning frame and re-
move it from the base.
5.2 Rinse the frame under running water and
let it dry.
6. CLEANING THE TANK UNIT
| 9 |
6.1 Remove the tank
unit , empty it.
6.2 Squeeze the tank
cap with filter.
6.3 Unscrew the tank
stopper
water
filter,
rinse
all
the
components
under
running water and let
them dry.