Publicité
Les langues disponibles
Les langues disponibles
Auto Stop control switch
•
Use the supplied USB cable and the AC/DC adaptor to connect the device to a household mains supply
or connect to your PC with the USB cable.
•
Place a record on the platter. Do not forget the puck when playing 45-RPM-singles.
•
Select the suitable speed with the RPM switch.
•
Turn the VOL/POWER knob clockwise to turn the device on and - at the same time - adjust the volume.
•
Use the lever (5) to raise the tone arm and lead it towards the outer grooves of the record. The player
starts rotating the record.
•
Use the lever to lower the tone arm until the stylus runs on the record groove.
•
Enjoy some music.
•
When a record ends, the record player automatically stops - as long as the auto stop switch is set to
„ON". When it is set to OFF, the player keeps on rotating the record until the tone arm is manually
taken off the record.
•
Use the stylus cover when the record player is not in use.
10
All manuals and user guides at all-guides.com
Speakers
Platter
Slip mat
Turntable arm lock
Speed selection switch
Turntable shaft
Tone arm
Operation
Volume knob
1
9
Stylus cartridge
2
10
Removable dust cover
3
11
Hinge
4
12
RCA output jack
5
13
USB jack
6
14
DC in
7
15
Power (on/off)
8
16
Basics
Publicité
