Cepex CTD075 Installation page 5

4. IRRIGATION PROGRAMMING
This section contains an example of weekly
irrigation program.Simply alter data in the
example to adapt the program to meet your
irrigation requirements.
The digital controller is programmed with the aid
of 4 buttons.
Programming step - used to select the
appropriate programming mode (e.g.clock
setting mode).
Parameter selection - used to select the
parameter to be changed (e.g.hour, minute,
etc.) To implement the change,the selected
parameter must be blinking.
Data increment (increase) - raises the value
of the selected parameter (e.g.adds an hour).
Data decrement (decrease) - lowers the value
of the selected parameter (e.g.deducts an
hour).
All manuals and user guides at all-guides.com
4
EN