Publicité
Les langues disponibles
Les langues disponibles
2. Getting Started
2.1 Extend the digital photo frame bracket on the back of the frame to the widest position
for greatest stability, and then plug one end of the included AC adapter into a standard
110-240V AC electrical outlet and the other end into the right side the frame.
2.2. Remove the protective film covering the LCD.
2.3. Remove the plastic battery insulator from the battery compartment and make sure
the remote control has a battery inside. Please refer to "Installing& Replacing Battery" if
you need a new battery.
2.4. Power on the unit by pressing the Power button at the backside of the unit (Press
ON/OFF button for a longer period).
3. Operating Instruction
3.1 Card and USB
After turning on the unit, it will show the startup picture, press MENU to get to the card
select interface.
Note: Make sure there are supported picture files in the Card or USB device.
All manuals and user guides at all-guides.com
It supports SD/SDHC/MMC and USB 2.0.
After inserting a card or USB device,
slideshow will play automatically, then
press MENU twice to access to photo, file,
calendar and setup. Press
to confirm.
5
Publicité
