Publicité
Les langues disponibles
Les langues disponibles
Main materials
Main table
Table insert
Extension wings
Cabinet
Base
Center trunnion
Bearing arm
Pulleys
General Dimensions
Base footprint
Assembled, w/ extension wings only, L x W x H
Assembled, with 30-in. rail set, L x W x H
Assembled, with 50-in. rail set, L x W x H
Caster elevation (approximate)
Shipping dimensions, saw only, L x W x H
Weights
Saw only – net weight
Saw only – shipping weight
1
Note: For 460V operation, an overload relay (Part No.
installed. A qualified electrician is recommended.
2
subject to local/national electrical codes.
3
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height, D = depth
n/a = not applicable
5.1 Kit configurations
Saw only
Saw with 30-inch rail set, wood ext table
Saw with 50-inch rail set, wood ext table
Saw with 50-inch rail set & router lift
Saw with 50-inch rail set & workbench
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, Powermatic reserves the right to change specifications at any time and without prior notice,
without incurring obligations.
aluminum
23 x 28 in. (584 x 711 mm)
42-5/8 x 32-3/4 x 40-3/8 in. (1083 x 832 x 1026 mm)
66-3/4 x 39-1/8 x 40-3/8 in. (1694 x 993 x 1026 mm)
84-3/4 x 39-1/8 x 40-3/8 in. (2151 x 993 x 1026 mm)
3/4 in. (19 mm)
29-7/8 x 33 x 43-1/2 in. (760 x 840 x 1105 mm)
385 lb. (175 kg)
405 lb. (184 kg)
535 lb. (243 kg)
555 lb. (252 kg)
PM2000B-2107BORA
Stock numbers
PM231B
PM23130K
PM23150K
PM23150RK
PM25150RK
PM23150WK
PM25150WK
Table 2
9
cast iron
cast iron
steel
steel
cast iron
cast iron
steel
398 lb. (181 kg)
548 lb. (249 kg)
) must be purchased separately and
PM251B
PM253B
PM25130K
PM25330K
PM25150K
PM25350K
PM25350RK
PM25350WK
Publicité
