Hamilton Beach 78217 Mode D'emploi page 4

How to Vacuum-Seal
NOTICE: This vacuum sealer is intended to be used only with heat-seal bags. For best results, and to avoid damaging the vacuum sealer,
use only heat-seal bags. Do not use household plastic bags!
1. Determine size and cut bag
rolls to size needed. Allow
space for sealing top and
bottom of bag. If using
preformed bags, skip to
Step 5.
4
All manuals and user guides at all-guides.com
2. Plug into outlet. Place bag
inside vacuum chamber
using bag stop and alignment
guides.
w CAUTION Burn Hazard. Seal bar is hot. Avoid touching it.
• Allow unit to cool 20 seconds before making or vacuum-
sealing another bag.
• Never open the lid during use.
• Do not let moisture into the vacuum chamber. This may
damage the motor.
3. Lower lid and press both
corners to latch; then press
S button.
eal
4. Wait until light turns green.
Press lock-release button to
open lid; remove bag.